 |
PG288UK/PG58 DUAL SYSTEM |
PG288UK/PG58 DUAL SYSTEM
Read moreGo to the glossary receiver.
Complete dual wireless system - including two handheld mics
- Hassle free setup
- Internal antennas simplify operation and storage
- Only one channel select button
- A seven-segment LED indicated instantly if the selected channel is occupied
- Reliable wireless technology
- Microprocessor controlled Predictive Diversity
- 10 selectable frequencies
- Up to 4 compatible systems per band
Fast and easy setup
Simply press the channel button on the front of receiver and choose one of 10 available channels. A seven-segment LED indicates instantly if the selected channel is available. Once this is done, choose the same on the transmitter, and you are ready to go.
How many musicians can use this system simultaneously?
A maximum of four musicians can use Performance Gear Wireless systems in parallel. One wireless system consists of one bodypack transmitter and one receiver, so at a maximum you can run two dual receiver systems simultaneously.
Internal antennas
For ideal signal strength, antennas on a wireless system need to be setup in a certain way. The internal antennas on Performance Gear Wireless systems are already set in this ideal way, offering up to 75 m operating range and optimal signal strength.
Additionally internal antennas cannot be broken during setup, use or transport.
System technical specifications
- Compatible systems per frequencyThis is how many times a sound or radio wave oscillates in one second.Read moreGo to the glossary band (up to): 4
- Selectable frequencies: 10
- Auto Setup Features: No
- Audio Reference Companding: No
- Included Antennas: Internal 1/4-wave
- Antenna Options: No
- Receiver Network Ability: No
- PC Control: No
- Rack Hardware: Optional (URT)
- Case: Optional System Case
- Transmitter Display: Multi-color LED
- Receiver Display: Multi-color LED
- Battery, Endurance: 9V, >8 h
Further Technical Specs
PG88 Dual Receiver
- Output Impedance XLR connector: 200 Ω 1/4 inch connector: 1kΩ
- Audio Output Level Ref.
- +/– 33 kHz deviation with
- 1 kHz tone
- XLR connector (into 100K Ω load): –19 dBV, typical
- 1/4 inch connector (into 100K Ω load): –5 dBV, typical
- Sensitivity –105 dBm for 12 dB SINAD, typical
- Image Rejection >50 dB, typical
- Dimensions 188 mm L x 103 mm W x 40 mm D (7.4 in. x 4.0 in. x 1.5 in.)
- Dimensions - PG88 388 mm L x 116 mm W x 40 mm D (15.3 in. x 4 in. x 1.5 in.)
- Weight 241 grams (8.5 oz)
- Weight - PG88 429 grams (15.1 oz)
- Housing Molded ABS
- Power Requirements 12–18 Vdc at 160 mA (PG4), 320mA (PG88), supplied by external power supply
PG2 Handheld Transmitter
- Audio Input Level
- +2 dBV maximum at -10dB position
- -8 dBV maximum at 0dB position
- Gain Adjustment Range 10dB
- RF Transmitter Output 10 mW typical (dependent on applicable country regulations)
- Dimensions 223.52 mm L x 53.34 mm Dia. (8.8 in. x 2.10 in.)
- Weight 218 grams (7.7 oz.) without battery
- Housing Molded ABS handle and battery cup
- Power Requirements One 9V alkaline or rechargeable battery
- Battery Life Up to 8 hours (alkaline)
Read moreGo to the glossary condenser microphoneCondenser microphones are more sensitive, give a smooth, natural sound and need to be powered.Read moreGo to the glossary capsule for use with all current Shure wireless handheld transmitters for consistently superior sound capture and reinforcement in critical ENG interview applications.
Frequency ranges and power output of the transmitter
| Band | Range | Power Output |
| K6E* | 606-618 MHz | 10 mW |
| K8E | 618-630 MHz | 10 mW |
| T10 ** | 854-865 MHz | 10 mW |
* Primary UK frequency version covering Channel 38. Usable now and after the 2012 switchover.
** Can be used after 2012 switchover if tuned to licence free deregulated spectrum (863-865) ONLY.
Channel 38 switchover information and helpline 01992 703038
Please note that a valid license is required to operate wireless equipment in Channel 38. Contact JFMG at www.jfmg.co.uk for details.