 |
PG14UK/PG185 Lavalier System |
PG14UK/PG185 Lavalier System
Read moreGo to the glossary receiver.
Complete wireless lavalier system - the perfect introduction to Shure wireless
- Hassle free setup
- Internal antennas simplify operation and storage
- Only one channel select button
- A seven-segment LED indicated instantly if the selected channel is occupied
- Reliable wireless technology
- Microprocessor controlled Predictive Diversity
Fast and easy setup
Simply press the channel button on the front of receiver and choose one of 10 available channels. A seven-segment LED indicates instantly if the selected channel is available. Once this is done, choose the same on the transmitter, and you are ready to go.
How many musicians can use this system simultaneously?
A maximum of four musicians can use Performance Gear Wireless systems in parallel. One wireless system consists of one bodypack transmitter and one receiver.
Internal antennas
For ideal signal strength, antennas on a wireless system need to be setup in a certain way. The internal antennas on Performance Gear Wireless systems are already set in this ideal way, offering up to 75 m operating range and optimal signal strength.
Additionally internal antennas cannot be broken during setup, use or transport.
System technical specifications
- Compatible systems per frequencyThis is how many times a sound or radio wave oscillates in one second.Read moreGo to the glossary band (up to): 4
- Selectable frequencies: 10
- Auto Setup Features: No
- Audio Reference Companding: No
- Included Antennas: Internal 1/4-wave
- Antenna Options: No
- Receiver Network Ability: No
- PC Control: No
- Rack Hardware: Optional (URT)
- Case: Optional System Case
- Transmitter Display: Multi-color LED
- Receiver Display: Multi-color LED
- Battery, Endurance: 9V, >8 h
Further Technical Specs
PG4 Receiver
- Output Impedance XLR connector: 200 Ω 1/4 inch connector: 1kΩ
- Audio Output Level Ref.
- +/– 33 kHz deviation with
- 1 kHz tone
- XLR connector (into 100K Ω load): –19 dBV, typical
- 1/4 inch connector (into 100K Ω load): –5 dBV, typical
- Sensitivity –105 dBm for 12 dB SINAD, typical
- Image Rejection >50 dB, typical
- Dimensions 188 mm L x 103 mm W x 40 mm D (7.4 in. x 4.0 in. x 1.5 in.)
- Dimensions - PG88 388 mm L x 116 mm W x 40 mm D (15.3 in. x 4 in. x 1.5 in.)
- Weight 241 grams (8.5 oz)
- Weight - PG88 429 grams (15.1 oz)
- Housing Molded ABS
- Power Requirements 12–18 Vdc at 160 mA (PG4), 320mA (PG88), supplied by external power supply
PG1 Bodypack Transmitter
- Audio Input Level
- -10 dBV maximum at "mic" gain position
- +10 dBV maximum at 0dB gain position
- +20 dBV maximum at -10dB gain position
- Gain Adjustment Range 30 dB
- Input Impedance 1mΩ
- RF Transmitter Output 10 mW typical (dependent on applicable country regulations)
- Dimensions 110 mm H x 64 mm W x 21 mm D (4.3 x 2.5 x 0.8 in.)
- Weight 75 grams (2.6 oz.) without battery
- Housing Molded ABS
- Power Requirements One 9V alkaline or rechargeable battery
- Battery Life Up to 8 hours (alkaline)
Frequency ranges and power output of the transmitter
| Band | Range | Power Output |
| K6E* | 606-618 MHz | 10 mW |
| K8E | 618-630 MHz | 10 mW |
| T10 ** | 854-865 MHz | 10 mW |
* Primary UK frequency version covering Channel 38. Usable now and after the 2012 switchover.
** Can be used after 2012 switchover if tuned to licence free deregulated spectrum (863-865) ONLY.
Channel 38 switchover information and helpline 01992 703038
Please note that a valid license is required to operate wireless equipment in Channel 38. Contact JFMG at www.jfmg.co.uk for details.