COMING SOON

Audio performance

• 24-bit / 48 kHz digital audio delivers incredibly clear and accurate capturing of the source material
• Wide frequency range with flat response for superb low range and transient response
• 120 dB dynamic range provides excellent signal-to-noise performance
• Wide selection of trusted Shure Microphones

RF Performance

• 64-72 MHz wide frequency band versions
• 8 MHz TV = 17 WL Channels (at 10 mW, preprogrammed)
• 1 mW, 10 mW, 20 mW menue-selectable RF power options
• Signal stability with no audio artifacts extends over the entire 100 meter line-of-sight range using standard supplied dipole antennas
• Optimized scanning automatically finds and deploys the cleanest frequencies available

Encryption

• Advanced Encryption Standard (AES-256)
• A new, unique, randomized encryption key is generated every time encryption is enabled
• Enabled via front panel menu on the receiver and sent over IR sync

Operation and Configuration

• Proprietary Shure Gain Ranging optimizes the system’s dynamic range for any input source and eliminates the need for gain adjustments at the transmitter
• Up to 60 dB of adjustable system gain is easily accessible from the receiver front panel
• Interference detection and alerts provide instant confirmation when interference is present
• Ethernet networking for streamlined setup across multiple receivers, Wireless Workbench 6 (WWB6) integration, as well as AMX and Crestron control
  Support for frequency coordination with the Axient™ Spectrum Manager
  Rugged metal housing on both transmitters and receiver
• LCD screens with adjustable contrast and brightness on both transmitters and receivers

Advanced Rechargeability

• Adapted from Axient™ intelligent power management technology
• Lithium-Ion chemistry and intelligent Shure battery circuitry results in rechargeable batteries with zero memory effect. The battery can be recharged at any time; a complete discharge is not necessary
• Provides ULX-D handheld and bodypack transmitters with 12+ hours of performance time
• Transmitters and receivers display remaining battery life in hours and minutes accurate to within 15 minutes
• SBC200 Dual Docking Charger recharges batteries while inside or outside transmitters
• Up to four SBC200s can be linked together to provide docked charging of eight transmitters from one power supply
• The SBC800 Eight-Bay Charger brings up to eight SB900 batteries to full charge within three hours and 50 % charge in one hour, with charge status LEDs for each battery
• AA-sized battery backwards compatibility
• Both chargers fit in a standard-size rack drawer for easy transport and storage

System technical specifications

• Compatible systems per frequencyThis is how many times a sound or radio wave oscillates in one second.Read moreGo to the glossary band (up to): 72
• Auto Setup Features: Scan/Group Scan/Sync
• Audio Reference Companding: No
• Included Antennas: Remoteable 1/2-wave
• Antenna Options: Yes
• Receiver Network Ability: Integrated
• PC Control: Yes
• Rack Hardware: Included
• Transmitter Display: Backlit multi-function LCD
• Receiver Display: Multi-function LCD + LEDs
• Battery, Endurance: @ 10 mW, Shure SB900: >12 h / Alkaline: 11 h
• Environment: Demanding installations

Further Technical Specs

ULXD4 Digital Wireless Receiver

RF INPUT

• Spurious Rejection: >80 dB, typical
• Connector Type: BNC
• ImpedanceThis describes how resistant an electrical circuit is to the flow of electricity passing through it.Read moreGo to the glossary: 50 Ω
• Bias Voltage: 12–13 V DC, 170 mA maximum, per antenna

AUDIO OUTPUT

• Gain Adjustment Range: -18 to +42 dB in 1 dB steps (plus Mute setting)
• Configuration:
  • 6.35 mm: ImpedanceThis describes how resistant an electrical circuit is to the flow of electricity passing through it.Read moreGo to the glossary balanced (Tip=audio, Ring=no audio, Sleeve=ground)
  • XLR: Balanced (1=ground, 2=audio +, 3=audio -)
• ImpedanceThis describes how resistant an electrical circuit is to the flow of electricity passing through it.Read moreGo to the glossary
  • 6.35 mm: 100 Ω (50 Ω Unbalanced)
  • XLR: 100 Ω
• Full Scale Output
  • 6.35 mm: +12 dBV
  • XLR: LINE setting= +18 dBV, MIC setting= -12 dBV
• Mic / Line Switch: 30 dB pad
• Phantom PowerThis must be provided to all condenser microphones in order for them to operate.Read moreGo to the glossary Protection
  • 6.35 mm: Yes
  • XLR: Yes

NETWORKING

• Power Over Ethernet (PoE): No, protected
• Network Interface: Single Port Ethernet 10 / 100 Mbps
• Network Addressing Capability: DHCP or Manual IP address
• Maximum Cable Length: 100 m

ADDITIONAL SPECS

• Audio Frequency ResponseThis is the range of frequencies, from the lowest to the highest, that a mic can pick up.Read moreGo to the glossary: 20 Hz – 20 kHz, flat
• Dynamic RangeThis is the difference between the queitest and loudest sound that a mic can pick up.Read moreGo to the glossary: 120 dB, extended
• Tuning Range: Up to 72 MHz
• Dimensions: 197 mm x 171 mm x 42 mm, H x W x D
• Weight: 913 g, without antennas
• Housing: Galvanized steel

ULXD2 Handheld Wireless Transmitter

AUDIO INPUT

• Configuration: unbalanced
• Maximum Input Level (1 kHz at 1% THD): 145 dB SPL (SM58), typical, Note: Dependent on microphone type
• Preamplifier Equivalent Input Noise (EIN): -120 dBV, A-weighted, typical

RF OUTPUT

• Antenna Type: Integrated Single Band Helical
• Occupied Bandwidth: <200 kHz
• Modulation Type: Shure Proprietary Digital
• Power: 1 mW, 10 mW, 20 mW

ADDITIONAL SPECS

• Audio Frequency ResponseThis is the range of frequencies, from the lowest to the highest, that a mic can pick up.Read moreGo to the glossary: 30 Hz to 20 kHz (±1 dB), flat, Note: Dependent on microphone type
• Dynamic RangeThis is the difference between the queitest and loudest sound that a mic can pick up.Read moreGo to the glossary: 120 dB
• Operating Range: 100 m
• Gain Offset Range: 0 to 21 dB (in 3 dB steps)
• Battery Type: Shure SB900 Rechargeable Li-Ion or 2 x AA batteries
• Battery Runtime @ 10 mW:
  • Shure SB900: >12 hours
  • Alkaline: 11 hours
• Dimensions: 256 mm x 51 mm, L x Dia.
• Weight: 340 g, without batteries
• Housing: Machined aluminum

ULXD1 Digital Wireless Bodypack Transmitter

AUDIO INPUT

• Connector: 4-Pin male mini connector (TA4M)
• Configuration: Unbalanced
• ImpedanceThis describes how resistant an electrical circuit is to the flow of electricity passing through it.Read moreGo to the glossary: 1 MΩ
• Preamplifier Equivalent Input Noise (EIN): -120 dBV, A-weighted, typical
• Maximum Input Level, 1 kHz at 1% THDTotal Harmonic Distortion is a measure of how much electrical noise a device produces. Read moreGo to the glossary
  • Pad Off: 8.5 dBV (7.5 Vpp)
  • Pad On: 20.5 dBV (30 Vpp)

RF OUTPUT

• Connector: SMA
• Antenna Type: 1/4 wave
• ImpedanceThis describes how resistant an electrical circuit is to the flow of electricity passing through it.Read moreGo to the glossary: 50 Ω
• Occupied Bandwidth: <200 kHz
• Modulation Type: Shure Proprietary Digital
• Power: 1 mW, 10 mW, 20 mW

ADDITIONAL SPECS

• Audio Frequency ResponseThis is the range of frequencies, from the lowest to the highest, that a mic can pick up.Read moreGo to the glossary: 20 Hz to 20 kHz (±1 dB), flat, Note: Dependent on microphone type
• Operating Range: 100 m
• Connector: 4-pin TQG
• Gain Offset Range: 0 to 21 dB (in 3 dB steps)
• Battery Type: Shure SB900 Rechargeable Li-Ion or AA batteries
• Battery Runtime @ 10 mW
  • Shure SB900: >12 hours
  • Alkaline: 11 hours
• Dimensions: 86 mm x 66 mm x 23 mm, H x W x D
• Weight: 142 g, without batteries
• Housing: Cast aluminum