 |
Beta 87C with UR2 Handheld Transmitter |
Beta 87C with UR2 Handheld Transmitter
- Switchable RF power (10/50 mW country dependant)
- Infrared transmitter sync
- Bit-mapped backlit LCD
- Ergonomic design
- All-metal die-cast construction
- Frequency and power lockout
- 2 “AA” batteries (included) for more than 8 hours continous use
The Beta 87C on the UR2 transmitter features the Beta 87C cardioid condenser microphone head which gives you studio quality sound and is tailored for lead vocals for live performance. The cardioid polar pattern compensates for the isolation often associated with the use of personal monitors.
The flagshig UR2 Wireless Handheld Transmitter offers the most advanced features and controls including a bit-mapped backlit LCD display, infrared automatic transmitter sync and switchable RF power. It also has frequency and power lockout cabability and can be used continuously for up to 8 hours using 2 x AA Batteries (included). The UR2 is made from an all-metal die-cast construction for maximum durability.
This transmitter requires the UR4D or UR4S receiver to complete the system.
All Shure wireless transmitter designs allow for interchangeable microphone heads
- RF Carrier Frequency Range: 470-865 MHz, depending on region
- Working Range
- 150 m (500 ft.), under typical conditions
- 500 m (1600 ft) line-of-sight, outdoors for a single system
- NOTE: Actual working range depends on RF signal absorption, reflection and interference
- Audio Frequency Response: 40 – 18,000 Hz,(+1 dB, –3 dB).
- NOTE: Overall system frequency response depends on the microphone element
- Gain Adjustment Range: –10 to +20 dB
- Modulation: FM (45 kHz max. deviation), compander system with pre- and de-emphasis
- RF Power Output: 10 / 50 mW
- Dynamic Range: >105 dB, A-weighted
- Signal Polarity: Positive pressure on microphone diaphragm produces positive voltage on XLR output pin 2 with respect to XLR pin 3 and on the tip of the 1/4-inch output jack.
- System Distortion (ref. ± 45 kHz deviation, 1 kHz modulation): <0.3% Total Harmonic Distortion typical
- Current Drain:
- 180 mA max. (normal RF power setting)
- 240 mA max. (high RF power setting)
- Operating Temperature Range: –18° to +57° C (0° to +135° F)
- NOTE: Battery characteristics may limit this range
- NOTE: Electrical safety approval is based on a maximum ambient temperature of 35°C (95°F).
- Housing: Aluminum die-cast handle and aluminum machined battery cup
Read moreGo to the glossary condenser microphoneCondenser microphones are more sensitive, give a smooth, natural sound and need to be powered.Read moreGo to the glossary capsule for use with all current Shure wireless handheld transmitters for consistently superior sound capture and reinforcement in critical ENG interview applications.
Frequency ranges and power output for the transmitters
| Band | Range | Power Output |
| G1E | 470-530 MHz | 10/50 mW |
| J5E | 578-638 MHz | 10/50 mW |
| K4E* | 606-666 MHz | 10/50 mW |
| L3E | 638-698 MHz | 10/50 mW |
| M5E | 694-758 MHz | 10/50 mW |
| Q5 | 740-814 MHz | 10/50 mW |
| R9** | 790-865 MHz | 10/50 mW |
* Primary UK frequency version covering Channel 38. Usable now and after the 2012 switchover.
** Can be used after 2012 switchover if tuned to licence free deregulated spectrum (863-865) ONLY.
Channel 38 switchover information and helpline 01992 703038
Please note that a valid license is required to operate wireless equipment in Channel 38. Contact JFMG at www.jfmg.co.uk for details.