Shure Product

SM86 with ULX2 Handheld Transmitter

SM86 with ULX2 Handheld Transmitter

The advanced features of the ULX2 transmitter coupled with the SM86 head delivers smooth reproduction of lead vocals.
  • 8-9 Hour Battery Life
  • Power: On/Off Switch, Battery
  • LED-Green When ON, Red When Battery Low
  • Three-segment Battery Power Icon
  • PEAK Icon-Appears When Audio Signal Overloads
  • Group/Channel Displays
  • SET Button for Saving Settings
  • Adjustable Audio Gain Control
  • Battery Cover Unscrews to Expose Battery and Gain Control
  • 9V Battery Included

The SM86 with the ULX2 transmitter features the SM86 cardioid condenser microphone head which is tailored for smooth,  warm and rich vocal reproduction.

The ULX2 Wireless Handheld Transmitter offers advanced features and controls including a backlit LCD display showing group, channel and battery fuel guage.  It also has frequency and power lockout cabability and can be used continuously for up to 8 hours using 1 x 9v Battery (included).

This transmitter requires the ULXP4 receiver to complete the system.

 All Shure wireless transmitter designs allow for interchangeable microphone heads.

 

  • Transmitter Type: Handheld
  • Dimensions: 213 mm x 49 mm
  • Battery, endurance: 9v, >8 h
  • Weight: 251 g
  • Further technical specifications:
    • Effective Range:  100 m (300 ft.) under optimal conditions
    • Audio Frequency Response:  25 to 15,000 Hz, ±2 dB
    • Transmitter Gain Adjustment Range: 25 dB
    • Receiver Audio Output Level (±38 kHz deviation, 1 kHz tone)
    • XLR connector (into 600 ohm load): +3.9 dBV (line), –17 dBV (mic)
    • 1/4 inch connector (into 3000 ohm load): –2 dBV
      • RF Sensitivity:  1.26 μV for 12 dB SINAD (typical)
      • Image Rejection: 80 dB typical
      • Spurious Rejection: 75 dB typical
      • Ultimate Quieting (reference ±38 kHz deviation) : >105 dB, A-weighted
      • System Distortion (reference ±38 kHz deviation, 1 kHz modulation):  0.3% total harmonic distortion, typical
      • Power Requirements:  9V alkaline battery; 8.4 V Nicad optional
      • Battery Life:  8 to 9 hours (with 9V alkaline battery)
      • Operating Temperature Range:  - 20° to 49° C (- 4° to 120° F)
      • Overall Dimensions:  228.6 L x 51 mm
      • Net Weight: 258 g
      • RF Power Output:  30 mW maximum
      • Dynamic Range: >100 dB, A-weighted
    •

    RPW184

    Cartridge, housing assembly and matte grille for wireless KSM9. Black.
    A85WS Microphone Windscreen

    A85WS

    Reduces unwanted breath and wind noise. For use with Shure microphones such as the Beta 87A, Beta 87C, SM87A, and SM86 microphones. Available in black.

    RPM226

    Replacement grille for Shure SM86 wired microphones and handheld transmitters.

    WA555

    Grip/Switch Cover (black) for ULX and PG Wireless handhelds wireless transmitters.

    WA615M

    Multi-colored ID rings for Shure PG, PGX, SLX, ULX, UHF-R, T, UT, LX, and UC wireless handheld microphones.
    UAMS Wireless Mute Switch

    UAMS

    The Shure UAMS passive modular mute switch allows the performer to easily mute a wireless handheld microphone.

    RPW110

    Cartridge, housing assembly and matte grille for wireless PG58. Replacement part.

    RPW112

    Cartridge, housing assembly and matte grille for wireless SM58.

    RPW114

    Cartridge, housing assembly and matte grille for wireless SM86.

    RPW116

    Cartridge, housing assembly and matte grille for wireless SM87A.

    RPW118

    Cartridge, housing assembly and matte grille for wireless Beta 58A.

    RPW120

    Cartridge, housing assembly and matte grille for wireless Beta 87A.

    RPW122

    Cartridge, housing assembly and matte grille for wireless Beta 87C.
    VP68 Wireless Capsule, Broadcasting Microphone

    VP68 (RPW124)

    The VP68 (RPW124) is an omnidirectionalEqually sensitive to sound from all directions, but cannot be „aimed“ to isolate one area.Read moreGo to the glossary condenser microphoneCondenser microphones are more sensitive, give a smooth, natural sound and need to be powered.Read moreGo to the glossary capsule for use with all current Shure wireless handheld transmitters for consistently superior sound capture and reinforcement in critical ENG interview applications.

    WA371

    Microphone mounting clip for all Shure handheld transmitters

    A1K

    Prevents handheld microphones and transmitters from rolling off a desk, podium, or other flat surface.

    WA610

    Molded plastic padded carrying case for compatible Shure wireless systems

    Frequency ranges and power output for the transmitters

    Band 

    		 Range

    Power Output
    G3E

    470-506 MHz 

    		 30 mW
    K2E*

    606-642 MHz

    		 10 mW
    M2 662-698 MHz  30 mW
    Q2

    748-784 MHz  

    		 30 mW
    S3 **

    829-865 MHz 

    		 10 mW

    * Primary UK frequency version covering Channel 38. Usable now and after the 2012 switchover. 

    ** Can be used after 2012 switchover if tuned to licence free deregulated spectrum (863-865) ONLY.

    Channel 38 switchover information and helpline 01992 703038

    Please note that a valid license is required to operate wireless equipment in Channel 38. Contact JFMG at www.jfmg.co.uk for details.