Shure Product

SLX4 Diversity Receiver

SLX4 Diversity Receiver

slx4_8_cols
3D-View
The SLX4 diversityWireless “diversity” receivers feature two separate antennas for consistent signal reception.Read moreGo to the glossary receiver, part of the SLX wireless series
  • Automatic Frequency Selection
  • Automatic Transmitter Setup
  • Detachable 1/4 wave antennas
  • Microprocessor-controlled diversity
  • Multi-function, backlit LCD
  • Rugged metal chassis
  • 1/2 rack design

The SLX4 wireless receiver offers unprecedented simplicity with features including Automatic Frequency Selection and Automatic Transmitter Setup. With included rack hardware and detachable antennas, it is ready for immediate installation right out of the box. Other features include a backlit LCD screen which provides group, channel and antenna information. A five segment audio meter lets you monitor the incoming audio signal from the transmitter.

The SLX4 receiver is used as part of the SLX wireless series which includes various handheld, headset and lapel mic options.

 

The SLX4 wireless receiver offers unprecedented simplicity with features including Automatic Frequency Selection and Automatic Transmitter Setup. With included rack hardware and detachable antennas, it is ready for immediate installation right out of the box. Other features include a backlit LCD screen which provides group, channel and antenna information. A five segment audio meter lets you monitor the incoming audio signal from the transmitter. The SLX4 receiver is used as part of the SLX wireless series which includes various handheld, headset and lapel mic options.

  • Power supply: PS21UK
  • Battery status: Yes
  • Further specs:
    • Dimensions: 42 mm H x 197 mm W x 134 mm D
    • Weight: 816 g
    • Housing:  Galvanized steel
    • Audio Output Level : XLR connector (into 600 Ω load): –13 dBV, 1/4 inch connector (into 3000 Ω load): –2 dBV
    • Output Impedance:  XLR connector: 200 Ω,  1/4 inch connector: 1kΩ
    • Sensitivity:  -105 dBm for 12 dB SINAD, typical
    •  Image Rejection:  >70 dB, typical
    • Operating Range Under Typical Conditions: 100m (300 ft.)
    •  Audio Frequency Response (+/– 2 dB):  Minimum: 45 Hz,  Maximum: 15 kHz
PS124 and PS124L In-LÖine Power Supply for transmitters and receivers

PS124E/UK

The PS124 In-Line Power Supply was developed to work with various rack-mountable Shure wireless receivers and/or PSM transmitters. It consists of the current PS45 In-Line Power Supply with a powersplitter attachment cable that allows for four power connections via a single in-line power supply.
UA221 Antenna Splitter

UA221

Antenna Splitter/Combiner Kit, Passive, for UC4, SLX4, ULXS4, ULXP4, U4S, U4D, UR4S and UR4D.

UA820

1/2 Wave OmnidirectionalEqually sensitive to sound from all directions, but cannot be „aimed“ to isolate one area.Read moreGo to the glossary Receiver Antenna for UHF-R, ULX, and SLX receivers (frequency range dependent).

UA400

This is the standard antenna supplied with SLX4 and SLX4L. Also compatible with the now obsolete U4D, U4S and UC4 receivers

UA844SWB-E

Antenna Splitter and Power Distribution System for receivers, 4-way active antenna splitter, wideband UHF, external power.

UA845SWB-E

Active Antenna/Power Distribution System, five-way, wideband UHF (470-952 MHz), internal switching power supply.

PA705

The Shure PA705 is a UHF wireless directional antenna designed for use with the Shure PSM Wireless System. 620 - 870 MHz.

PA805SWB

Directional Wideband Antenna for all PSM Systems, (470-870 MHz)

HA-8089

Wideband UHF (470-900 MHz) Remote Antenna for Shure UHF Receivers, PSM Transmitters and Antenna Distribution Systems.

UA860SWB

The Shure UA860SWB is a passive wide band UHF omnidirectionalEqually sensitive to sound from all directions, but cannot be „aimed“ to isolate one area.Read moreGo to the glossary antenna (470-1100Mhz). The UA860SWB is weather resistant and suitable for use outdoors. For use with SLX, ULX, UC, UHF and UHF-R wireless systems.

UA600

Antenna Kit, front mount, for SLX4, UR4S, UR4D and ULX single receivers, includes 2 coaxial antenna cables and 2 bulkhead adapters.

UA802

Coaxial Cable, BNC-BNC, RG58C/U type, 50 Ohm, 2 ft length (0.6 m).

UA806

Coaxial Cable, BNC-BNC, RG58C/U type, 50 Ohm, 6 ft length (2 m).
UA825 Coaxial Cable, BNC-BNC

UA825

Coaxial Cable, BNC-BNC, RG8X/U type, 50 Ohm, 25 ft length (7.5 m).
UA850 Coaxial Cable BNC-BNC

UA850

Coaxial Cable, BNC-BNC, RG8X/U type, 50 Ohm, 50 ft length (15 m).
UA8100 Coaxial Cable

UA8100

Coaxial Cable, BNC-BNC, RG213/U Type, 50 Ohm, 100 ft length (30 m).

PA725

10-foot (3 m) coaxial cable (RG-8) with BNC connectors.

UA440

Antenna Kit, front mount, includes four 2-foot BNC-BNC coaxial cables and four bulkhead adapters.

WA504

Universal Mounting Bracket for Connecting two different half-rack products. (eg: DFR11EQ to UC4, P4M to P6T)

PS21E/UK

In-line power supply (230V) for 200M, FP22, FP24, FP33 Mixer, SLX4, PGX4, ET4, EUT4, PG4 and PG88 receiver.

Frequency ranges and power output for the transmitters

Band    

Range           

Power Output

G4E

470-494 MHz

30 mW

G5E

494-518 MHz 

30 mW

K3E*

606-630 MHz

10 mW

L4E

638-662 MHz 

30 mW

P4

702-726 MHz 

30 mW

S6**

838-865 MHz

10mW

* Primary UK frequency version covering Channel 38. Usable now and after the 2012 switchover. 

** Can be used after 2012 switchover if tuned to licence free deregulated spectrum (863-865) ONLY.

Channel 38 switchover information and helpline 01992 703038

Please note that a valid license is required to operate wireless equipment in Channel 38. Contact JFMG at www.jfmg.co.uk for details.