 |
MX412SE/N Microflex Gooseneck Microphone, side exit cable |
MX412SE/N Microflex Gooseneck Microphone, side exit cable
The MX412SE/N Microflex gooseneck microphone provides a mute switch and cable exit on the side. It has a 12 inc (30.5 cm) gooseneck. Featuring high sensitivityThis is how mich signal a microphone produces for a given amount of sound.
Read moreGo to the glossary and balanced, transformerless output for maximum resistance to electromagnetic hum and RF interference, even over long cable runs.
Read moreGo to the glossary and balanced, transformerless output for maximum resistance to electromagnetic hum and RF interference, even over long cable runs.
Best suited to:
Speech
RRP: £ From 282.24
- Gooseneck length: 12 inch (30.5 cm)
- Mute Switch
- Cable exit on the side
- Interchangeable cartridges provide the right polar pattern for every application
- Locking flange mount for permanently securing microphone to surfaces
- Snap-fit foam windscreen
- Shock mount provides over 20 dB isolation from surface vibration noise
- Wide dynamic range and frequency response for accurate sound reproduction across the audio spectrum
- Balanced, transformerless output for increased immunity to noise over long cable runs
- New RF filtering
Interchangeable Cartridge
Designed for easy replacement and available in cardioid, supercardioid and omnidirectional polar patterns, the interchangeable cartridges offer wide frequency response and accurate sound reproduction for a broad variety of applications, such as houses of worship, courtrooms and conference centres. Plus, the condenser cartridges fit every model in the Microflex product line for enhanced convenience and consistent sound.
Other available options
- MX412/C (Cardioid), MX412/S (Supercardioid), MX412/N (No Cartridge): 12-inch Gooseneck Condenser Microphone, Attached XLR Preamp, Shock Mount, Flange Mount, Snap-Fit Foam Windscreen. *(Optional Desktop Base with 10 foot Cable: A412B)
- MX418/C (Cardioid), MX418/S (Supercardioid), MX418/N (No Cartridge): 18-inch Gooseneck Condenser Microphone, Attached XLR Preamp, Shock Mount, Flange Mount, Snap-Fit Foam Windscreen. *(Optional Desktop Base with 10 foot Cable: A412B)
- MX412D/C (Cardioid), MX412D/S (Supercardioid), MX412/N (No Cartridge): 12-inch Desktop Mini-Condenser Gooseneck-Mounted Microphone, Desktop Base with 10 foot Cable, Snap-Fit Foam Windscreen.
- MX418D/C (Cardioid), MX418D/S (Supercardioid), MX418D/N (No Cartridge): 18-inch Desktop Mini-Condenser Gooseneck-Mounted Microphone, Desktop Base with 10 foot Cable, Snap-Fit Foam Windscreen.
- MX412SE/C (Cardioid), MX412SE/S (Supercardioid), MX412SE/N (No Cartridge): 12-inch Gooseneck Condenser Microphone, Shock Mount, Flange Mount, 10-ft. Side-Exit Cable (or Bottom Exit), Snap-Fit Foam Windscreen, In-Line Preamp.
- MX418SE/C (Cardioid), MX418SE/S (Supercardioid), MX418SE/N (No Cartridge): 18-inch Gooseneck Condenser Microphone, Shock Mount, Flange Mount, 10-ft Side-Exit (or Bottom-Exit) Cable, Snap-Fit Foam Windscreen, In-Line Preamp.
-
MX412S/C (Cardioid), MX412S/S (Supercardioid), MX412S/N (No Cartridge): 12-inch Gooseneck Condenser Microphone, Attached XLR Preamp, Shock Mount, Flange Mount, Snap-Fit Foam Windscreen, Mute Switch, LED Indicator.
*(optional Desktop Base with 10 foot Cable: A412B) - MX418S/C Cardioid), MX18S/S (Supercardioid), MX418S/N (No Cartridge): 18-inch Gooseneck Condenser Microphone, Attached XLR Preamp, Shock Mount, Flange Mount, Snap-Fit Foam Windscreen, Mute Switch, LED Indicator. *(Optional Desktop Base with 10 foot Cable: A412B)
- Transducer Type: Condenser
- Polar Pattern: Supercardioid, Omnidirectional, Cardioid
- Frequency Response: 50 Hz - 17 kHz
- Sensitivity (1 kHz): Cardioid -33.5 dBV/Pa; Omnidirectional: -28.0 dBV/Pa; Supercardioid -32.5 dBV/Pa / Cardioid 21.1 mV/Pa; Omnidirectional: 39.8 mV/Pa; Supercardioid 23.7 mV/Pa
- Equivalent Selfnoise:
- Cardioid: 29.0 dB(A)
- Omnidirectional: 70.5 dB(A)
- Supercardioid: 28.0 dB(A)
- Sound Pressure:
- Cardioid: 123.0 dB
- Omnidirectional: 117.5 dB
- Supercardioid: 122.0 dB
- Frequency Repsonse Curve:
Reduces unwanted breath and wind noise. For use with Shure Microflex Gooseneck Microphones. Available in black.
Reduces unwanted breath and wind noise. For use with Shure Microflex gooseneck microphones. Available in black.
Snap-fit windscreen securely fastens to Microflex gooseneck microphones (contains 4).
OmnidirectionalEqually sensitive to sound from all directions, but cannot be „aimed“ to isolate one area.Read moreGo to the glossary cartridge for all Microflex MX183, MX202, MX391, MX392, MX393, MX405, MX410, MX412, MX418 and WL183 microphones. White or Black
Read moreGo to the glossary cartridge for all Microflex MX183, MX202, MX391, MX392, MX393, MX405, MX410, MX412, MX418 and WL183 microphones. White or Black
SupercardioidPicks up most sound in front of the microphone and very little from the sides, making it more directional than a cardioid mic. Read moreGo to the glossary cartridge for WL183, WL184, WL185 and all Microflex MX183, MX202, MX391, MX392, MX393, MX405, MX410, MX412, MX418 Microphones. White or Black.
Read moreGo to the glossary cartridge for WL183, WL184, WL185 and all Microflex MX183, MX202, MX391, MX392, MX393, MX405, MX410, MX412, MX418 Microphones. White or Black.
CardioidPicks up most sound in front of the microphone and some from the sides. It is less susceptible to feedback in high volume environments.Read moreGo to the glossary cartridge, black for all Microflex MX185, MX202, MX391, MX392, MX393, MX405, MX410, MX412, MX418 and WL185 microphones.
Read moreGo to the glossary cartridge, black for all Microflex MX185, MX202, MX391, MX392, MX393, MX405, MX410, MX412, MX418 and WL185 microphones.
Mount for KSM137, KSM141, SM63, SM63L, SM63LB, SM81, VP64A, VP64AL, MX412, MX418, MX412S, MX418S, MX412SE, and the MX418SE microphones.
Mounting Flange, Locking, Black.
The A400SM Shock Mount - to decouple a microphone from the mounting surface.
The A400XLR assembly consists of a 3-pin XLR-type (female)connector and insert. Existing A400SM Shock Mounts can be retrofitted for quick release performance with the A400XLR Connector/Insert. See the gallery for an explaining image.
The A400SMXLR packages the A400SM Shock Mount with the A400XLR Connector/Insert.
Matte Silver 5/8-27 threaded mounting flange.- A12 / Matte Silver- A12B / Black
Accessory extension cable, 4-pin mini connector (TA4F female to TA4M male), 15 foot (4.6 m).
In-Line Preamplifier for Microflex Microphones. Boosts resistance to Radio FrequencyThis is how many times a sound or radio wave oscillates in one second.Read moreGo to the glossary Interference (RFI).
Read moreGo to the glossary Interference (RFI).
MX412S/N Inline Preamp, cable on the side (15 KB)
Download
Download