 |
P2R Wireless Bodypack Receiver |
P2R Wireless Bodypack Receiver
The P2R Hybrid Bodypack Receiver is the world's first bodypack receiver to function as a wired receiver, a wireless receiver, or both at the same time. This and other unique features, along with excellent sound quality, make the P2R an exceptional value.
- Can operate as a wired or wireless bodypack, or both simulaneously
- Frequency locator
- Built-in headphone limiter
- Integrated cable management
- High-impact plastic chassis
- 1/4" Line input jack with high/low gain switch
The P2R dual-function (Hybrid) receiver can operate as a wired, wireless bodypack (with optional P2T Transmixer) or both simultaneously. Features include 8 selectable frequencies per system, and up to 4 compatible systems can be used together without interference. It has a volume control with a built in headphone limiter and the high-impact plastic chassis makes it rugged and durable.
- Battery Life: Wired-6 Hours Wireless-4 Hours using 1 x 9v Battery
- Dimensions: 122 mm x 73 mm x 32 mm
- Weight: 100 g
- Further Technical Specifications:
- RF Sensitivity: 109 dBm typical
- Squelch Threshold: 102 dBm typical
- Antenna: Attached Whip
- Audio Input Connector: Connector Type: 1/4-inch Mono
- Impedance: 1 megohm
- Maximum Input Level: LO = +0 dBu; HI = 10 dBu
- Frequency Response: 30 Hz to 20 kHz (+/3 dB); earphone dependent
- Power Requirements: 9 V alkaline battery, Duracell® type MN1604 recommended
- Audio Output Connector: 1/8 inch (3.5 mm)
- Minimum Load Impedance: 8 ohms
- Net Weight: 100 g (3.52 oz.), less battery
- Overall Dimensions: 122 mm x 73 mm x 32 mm (4.809 in. x 2.875 in. x 1.251 in.)
Allows user to mix an ambient signal to their in-ear monitor mix.
Splitter cable for wired use of instruments with the P2R Hybrid Bodypack receiver.
PA200 series splitter cables split the signal from an instrument for connection to a P2R receiver and a wireless transmitter simultaneously. Three splitter cable models are available to allow compatibility with all Shure wireless bodypack transmitters.
PA200 series splitter cables split the signal from an instrument for connection to a P2R receiver and a wireless transmitter simultaneously. Three splitter cable models are available to allow compatibility with all Shure wireless bodypack transmitters.
Neoprene Belt Pouch for Shure wireless bodypack transmitters LX1, SC1, SLX1, T1G, T1, U1, UC1, ULX1, UT1, PGX1
Neoprene bodypack arm pouch for all Shure bodypack transmitters.
Battery Adaptor for connection to a Shure PS41 AC Adaptor (included) via a threaded DC connector. Use with Shure models P2R, P4R, P4HW, T1, T1G, LX1, UT1, ULX1, MX1BP and VP3.
Frequency ranges and power output of the transmitters
| Band | Range | Power Output |
| H2 | 518-554 MHz | 30 mW |
| Q3 | 748-784 MHz | 30 mW |
| R8 | 800-814 MHz | 20 mW |
| S5* | 842-865 MHz | 10 mW |
*denotes UK frequency band.
Please be aware of country-specific laws when operating on different frequency bands.
Guitar Cable (part No: 95B2320)
Battery 9v
Zipper-Bag (95B2324)