Shure Product

M35X DJ Phono Cartridge

M35X DJ Phono Cartridge

Shure M35X Phono cartridge for House and Techno DJ's.
RRP: £ 79.56
  • The M35X's versatile Shure Type I medium-diameter cantilever can stand up to continuous, demanding use, yet it is compliant enough to trace signal modulations as small as a millionth of an inch.
  • With a tracking force range of 1.5 to 3 grams, the M35X provides considerable skip resistance.
  • Skip Resistance: high
  • Output: high
  • Record Wear: very low
  • Sound Emphasis: extreme clarity and deep drop bass

Recommended music genres for the M35x 

The M35X is ideal for use in House/Techno environments, bringing the music alive by capturing every nuance of a recording, from deep drop bass to exceptionally clear mid and high frequencies. The cartridge’s low record wear helps DJs preserve hard to replace vinyl, while its high skip resistance serves as a safeguard against the hazards of back-cueing.

What does the M35X include?

The M35X includes the cartridge and one stylus, as well as an accessory pack that features an extra set of Headshell wires, stylus cleaning brush, a headshell weight, stylus guard and mounting hardware. It does not include a headshell so one will need to be provided in order to connect the cartridge to your turntable.

Replacement styli for this cartridge is the N35X

  • Tone Arm Mount: 1/2" standard mount
  • Cartridge Type: MM
  • Output Voltage: 6,0 mV
  • Recommended Load: 47 kΩ; 250 pf
  • Tracking Force Range: 1,5 - 3 g
  • (Stylus) Cantilever:
    • Shure Type S
    • Heat-treated aluminum alloy / tubular
    • 1 mil wall thickness / 30 mil diameter 
  • Diamond Stylus Tip:

    Sperical 0,7 mil

  • Compliance: 20 µm/mN
  • Frequency Response: 20 Hz - 20 kHz
  • Stereo Channel Balance: 2 dB
  • Channel Separation (at 1kHz): 20 dB
  • Net Weight: 6,2 g
  • Height: 15,9 mm
  • Replacement Needles:
Tonearm Gauge to measure the tracking force.
Replacement needle for M35X cartridge.
Stylus for wide groove/78 RPM recordings and for Shure M78S phonograph cartridge.
  • Stylus Guard
  • Headshell Weight (3 grams)
  • Headshell Screwdriver (Phillips)
  • Extra Set of 4 Headshell Wires (4-99)
  • Stylus Cleaning Brush
  • User Guide
  • Mounting hardware