Accessories for Loudspeakers, Speaker Systems & Line Arrays

 K Series

K Series Totes and Covers
M10 forged-shoulder, steel eyebolt kit for suspending K8, K10 or K12
These powder-coated steel yoke brackets are used to mount a K Series loudspeaker horizontally or vertically.
16 inch (40.6 cm) extension pole for use with K Series speaker pole and K8 or K10 loudspeaker.

 AD-C Acoustic Design Ceiling Mount

ADC-MR4: Mud ring bracket for installation of AD-C42T in existing sheetrock or plaster (Pack of 6, FG-000234-00)
ADC-MR: Mud ring bracket for installation of AD-CI52T in existing sheetrock or plaster (Pack of 6, FG-000225-00)
Mud ring bracket for installation of AD-CI522ST in existing sheetrock or plaster (Pack of 6, FG-000226-00)
ADC-NC: New construction bracket for AD-CI52T (Pack of 6, FG-000223-00)
ADC-NCS: New construction bracket for installation of AD-CI52T in sheetrock or other solid surfaces (Pack of 6, FG-000224-00)
ADC-NC4: New construction bracket for AD-C42T (Pack of 6, FG-000235-00)
AD-C800RG Round grille for AD-C820 und AD-C821 (white, paintable). Also available as pack of 6: AD-C800RG-6
AD-C800SG Square grille for AD-C820 und AD-C821 (white, paintable). Also available as pack of 6: AD-C800SG-6

 AD-S Acoustic Design Surface Mount

For mounting AD-S82 & AD-S82H Loudspeakers. This mount features a quick-connect/disconnect latch which provides electrical connections and a highly-adjustable balltype mount.
For mounting AD-S52 & AD-S52T Loudspeakers. The YM-5 yoke mount provides for mounting on most any surface and are adjustable on one axis. Available in black or white.
For mounting AD-S82 & AD-S82H Loudspeakers. The YM-8 and YM-8T yoke mounts provide for mounting on most any surface and are adjustable on one axis.

 Wideline 10

For rigging of WideLine-10 Line Array. This heavy-duty aluminum fly grid can support up 1,423 pounds (646.8 kg) flown (with a 7:1 strength rating) or up to 8 stacked enclosures. Also available in white. (AF-2102-LA-WHT)
The small frame will easily handle four enclosures and will interface with the QSC 215PCM or 215SB subwoofer in both a stacked or flown configuration.
This padded transport/storage case holds three WideLine-10 WL2102 loudspeakers and a small stacking grid.
Adapter frame that allows suspension of WL3082 under WL2012

 Wideline 8

The ultimate touring accessory for WideLine. This padded rack holds 8 WL2102 loudspeakers and a large fly grid.
Large array frame, supports up to twelve (12) WideLine-8 elements and four (4) WideLine-8 subs with 10:1 design factor. Available in black or white
Small array frame, supports up to twelve (12) WideLine-8 elements with 10:1 design factor
Extension bar, required for system with the subwoofers flown behind the main array. Available in black or white
WideLine-8 Pullback Bar. Available in black or white
Adapter frame that allows suspension of WL3082 under WL2012
Wood caster pallet for four (4) WL3082 line array elements, includes padded cover
One wood caster pallet (dolly) for transporting two WL212-sw or GP212-sw sub-woofer enclosures - INCLUDES ONE SOFT COVER 27.5” TALL to fit a two-unit tall stack. (FG-000358-01 plus FG-000361-00)
Aluminum array frame for stacking 4 or flying 8 WL218-sw. Available in black or white
Padded transport cover for WL218-sw
Wood caster pallets for GP218-sw

 ILA Installation Line Array

Kit of four (4) Quick Release Pins for use in lieu of included bolts.
Used for pulling back the bottom element of the array for aiming and stability or as the primary suspension component for certain small arrays.
The EB2082-i extension bar supports suspension where the center of gravity is beyond the limits of the FB2082-i.
Ground stacking is easily accomplished using the GS115-sw Ground Stack Kit.
The FB2082-i array frame supports most flown array applications.

 ISIS

For mounting ISIS I-82H Loudspeakers. I-YM8 Accessory Kit provides a yoke mount suitable for pole mounting and a pair of swivel extension feet for use as floor or stage monitors.