This example shows the typical requirements for a large club with multiple rooms. We have a line array system for the main room, plus QSC KW speakers in room two, and ceiling speakers in the toilets.

Click on the "i" symbols to get product details

The DSP 322ua meets the processing needs of today's demanding audio systems. Controlled over an Ethernet network using QSC's Venue Manager software, this newest generation of DSP devices are fully configurable. Storing up to 8 signal flow design configurations with nearly unlimited snapshot parameter recall, the DSP 322ua can fit any application. And with all data stored in the device memory, files can be uploaded from the unit to multiple computers without complications. Through QSControl.net, QSC's BASIS and next-generation RAVE and DSP products can be networked together and controlled from a single software interface. In addition, multiple networked computers can be set up to control and monitor all of the units simultaneously.

An NAC-100 network audio controller allows for master control of all zones. This would typically be placed behind a bar or in an office.

Click on the "i" symbols to get product details

Since both the QSC KW and KLA series speakers are powered, no amplifiers are required for rooms 1 or 2. The restrooms in this example are powered by QSC CX Installation amplifiers.

A totla of 16 QSC ceiling speakers have been deployed, 8 in each area. Music from either room 1 or 2 can be played in the restrooms via the discrete ceiling speakers.

Room 1 in this example is powered using the new QSC Line Array speakers. The KLA Series brings the power and sophistication of a line array system into an easy-to-use product significantly redefining the line array product category. With its simple Lift, Click and Play approach, KLA can be deployed in a fraction of the time required by comparable line array products.

Two ground stacked QSC KW speakers in Room 2 would be suitable for spaces with a capacity of 250 - 500. Each of the four KW Series models features a QSC designed, 1000 watt (2 x 500 W continuous) Class D power module. And continuing in the K Series tradition, every model is fitted with the identical high-output 1.75" HF device (full-range models) and woofers of the same high quality design, regardless of speaker size.